U-verse TV Equipment

I followed all of the normal & destructive reset instructions found at https://forums.att.com/conversations/uverse-tv-equipment/how-to-troubleshoot-your-dvrreceivers/5defc0c9bad5f2f606bd8568 and each time, the box just comes back up with a red X. (Usually with the number 2). I tried swapping in a di

I was with ATT U-verse years back and i did everything good to cancel with ATT. I was able to return 1 equipment because FEDEX would not take the rest because the rep that helped me only sent 1 barcode for the main equipment. I have tried to get the other ones sent back but it has affected my credit

So I've been an AT&T customer for years and I no longer have uverse, it's even sometime now but still have wireless phone service. I spent 2 days trying to request for someone to remove the cable they installed from the pole to my house but apparently they can't do that!!!! How the (Edited per commu

Neighbor has AT&T U-verse service connected to a Bauhn TV set. When he turns on the TV via button on the back of the set and turns on the cable box, he gets the "no signal" box which floats all around the screen. The TV is on the right input. AT&T service person went there, fixed it in less than a m

Main U-Verse box will not turn on even though there is power

Accidentally dropped remote in tub of water. Retrieved it immediately and dried it off. Could not get the remote to respond. Let it air dry over night and still no red or green indicator lights working, no buttons working. I replaced the batteries, now I get bright RED light but nothing else so I ta

Weird thing that started today. I have two receivers on ethernet and one DVR also on ethernet and only one receiver will work. The other receiver and teh DVR give me a "Uverse is not available at this time. Please try again later" and the option to restart receiver. Of course when I do, it comes bac

So I’ve been trying to reset my cable box to watch the flash so I held down the power button for ten seconds and nothing happened, I’ve unplugged the power cord for a while and it did light up but then went to black again, I have a VIP1200 if that helps but I just need to know how to fix this

UVerse: 2 Different TV's, 2 different HDMI cords and still no sound through the TV on any channels. ATT Cisco Router. Other routers in house work fine.

My wired set top box is a VIP2262. I have had it replaced once because programs recorded would remain on the box for 2-3 days and then be deleted without me initiating the delete command to remove. It is now doing the same removal with the second VIP2262 box. I am wondering if there is a software pr