4 Messages
pink screen/no audio
this happened in Feb'24 and now again for the past many weeks - the screen goes pink and there is no audio. Only way to solve it seems to be to power cycle the mini genie. I also changed the HDMI cable from the mini genie to the TV with a more expensive one. I just called DirecTV and they say that this is due to an "outage" !!?? but have no info on when it will get resolved. Is this legit or do I have a bad mini genie? The power button on the mini genie doesn't do the job. I have to physically yank the power cord out. I also swapped HDMI ports on the TV. No bueno.
Accepted Solution
shannon02
ACE - Expert
•
21.3K Messages
11 months ago
It is the Genie that supplies the picture/audio to the mini so if there is something wrong it is not sending it right..
0
shannon02
ACE - Expert
•
21.3K Messages
11 months ago
Have you done a red button reset on the Genie?
0
0
amritsari
4 Messages
11 months ago
I used to do that in the beginning, but it takes a long time to reset, while the mini genie only takes a minute. So now I only power cycle the mini genie.
0
0
shannon02
ACE - Expert
•
21.3K Messages
11 months ago
Mini clients are only remote controls for the Genie.
0
0
amritsari
4 Messages
11 months ago
I understand. I'm just describing to you that power cycling the mini genie fixes the problem temporarily and is much quicker. And the HDMI signal is mini genie to TV, not genie to TV.
0
0
amritsari
4 Messages
11 months ago
So I reset the Genie and haven't had the problem for many days. Think you were right. Thanks !
0
0