Is this an alignment issue or something else?

So up until yesterday I've not had any issue, but all of a sudden some of my HD channels started to report signal issues.  Then after a few more hours, the more of them were out.  I still have some but not all of them. So, I'm not sure if this is an alignment issue, cable, hardware or something else.

Receiver: HR34/700

Dish Type: SL3 LNB

Satellite transponders (32 total at 101º)
1-8   97 97 96 38 96 97 96 96
9-16  96 97 96  0 96 97 96 96
17-24 97 77 97 54 97 97 97 95
25-32 97 77 96 100 97 96 97 96
Signal Strength 97%

Satellite transponders (11 total at 99º(ca))
1-8 NA NA NA NA NA NA NA NA
9-16 0 80 0 83 0 83 0 82
17-24 0 84 0 85 0 86 0 87
25-32 NA NA NA NA NA NA NA NA
Signal Strength Not Acquired

Satellite transponders (14 total at 99º(cb))
1-8 0 89 0 89 0 86 0 89
9-16 0 88 0 87 0 86 NA NA
17-24 NA NA NA NA NA NA NA NA
25-32 NA NA NA NA NA NA NA NA
Signal Strength Not Acquired

Satellite transponders (16 total at 103º(ca))
1-8 87 82 88 82 88 79 85 76
9-16 90 83 89 80 86 79 85 83
17-24 83 81 84 81 83 82 84 79
25-32 NA NA NA NA NA NA NA NA
Signal Strength 88%

Satellite transponders (14 total at 103º(cb))
1-8 86 82 83 80 83 85 82
9-16 83 82 83 84 85 82 NA NA
17-24 NA NA NA NA NA NA NA NA
25-32 NA NA NA NA NA NA NA NA
Signal Strength 88%

Satellite transponders (18 total at 99º(s))
1-8 0 57 0 58 0 99 0 96
9-16 NA NA NA NA NA NA 0 0
17-24 0 92 0 0 0 53 0 86
25-32 NA NA NA NA NA NA NA NA
Signal Strength Not Acquired

Satellite transponders (10 total at 103º(s))
1-8 NA NA NA NA NA NA NA NA
9-16 NA NA NA NA NA NA 0 74
17-24 95 92 80 75 90 91 0 0
25-32 NA NA NA NA NA NA NA NA
Signal Strength Not Acquired

I've visually inspected the cable and it's appears to be fine.  The dish has not moved and there isn't anything blocking the signal.  Wanted to ask here before I started to do anything with the alignment, in fear that I messed it up when the issue was hardware.  Thanks