8 Messages
Dish/receiver compatibility
Wondering if a directv Slimline SWM 3 LNB 3D2RBLNBR0-14 DISH is compatible with HR24? If so, does it require a SWM power inserter?
8 Messages
Wondering if a directv Slimline SWM 3 LNB 3D2RBLNBR0-14 DISH is compatible with HR24? If so, does it require a SWM power inserter?
Accepted Solution
shannon02
ACE - Expert
•
21.1K Messages
1 year ago
Yes to both.
0
0
DIRECTVhelp
Community Support
•
255K Messages
1 year ago
Hi @shannon02, thanks for the quick response.
Hi @Ffrandy, yes the HR24 is SWiM compatible and it needs a SWiM power inserter as well.
Vince, DIRECTV Community Specialist
0
0
Ffrandy
8 Messages
1 year ago
Recommendation on a power inserter?
0
0
shannon02
ACE - Expert
•
21.1K Messages
1 year ago
Any 21v or 29v DTV power inserter will work
0
ddub
Tutor
•
9 Messages
21 hours ago
Primary unit is a Genie HR54-500 from 2016
My stand-alone set up in the back garage:
dish is new SWIM SL3, with power supply tried with and without spliter. Green light indicating power.
HR24 receiver
Connected dish to power to Sat In
Satellite settings configured correctly
Still get 771 after many sat config and reboot attempts.
No signal
I set the satellite angle exactly how the round dish had been positioned for the many years that worked perfectly in prior years before no longer supported.
Does the dish angle change for the new dish? What else could be wrong? Many many hours into this now.
Thank you for any guidance.
0
0