Try doing a non-destructive recovery and seeing if it is still happening. To do so:
Unplug the receiver or DVR power cord from the wall or back of the box.
Wait 10 seconds.
Plug in the receiver and DVR.
When three white dots appear on the screen, unplug the receiver/DVR again.
Repeat this process two more times.
Plug the receiver/DVR back in on the third time and leave in. Three white dots appear followed by a gear with a status bar at the bottom of the screen.
If the Disaster Recovery screen does not appear, repeat the steps above.
Hope this helps.
Thank you for contacting us on AT&T Community Forums!
baseballisback
ACE - Professor
•
8.3K Messages
4 years ago
Unplug.
Wait 30 seconds.
Plug it back in.
When you see the three circles on the screen, unplug.
Repeat that process.
Repeat it again.
The third time you see the three circles, keep it plugged in.
Did that help?
0
0
DIRECTVhelp
Community Support
•
255.4K Messages
4 years ago
Hello @Jcabba, we are happy to help.
Try doing a non-destructive recovery and seeing if it is still happening. To do so:
Hope this helps.
Thank you for contacting us on AT&T Community Forums!
Lafayette, AT&T Community Specialist
0
0