The "No Signal" is from the TV itself. Usually the issue is you are not currently on the correct INPUT/SOURCE that your streaming device is plugged into.
If it is on the correct input, check the HDMI cord to make sure it didn't get loose or fully unplug on either end. Naturally make sure it (the streaming device) is powering on in the first place.
Juniper
ACE - Expert
•
23K Messages
2 years ago
The "No Signal" is from the TV itself. Usually the issue is you are not currently on the correct INPUT/SOURCE that your streaming device is plugged into.
If it is on the correct input, check the HDMI cord to make sure it didn't get loose or fully unplug on either end. Naturally make sure it (the streaming device) is powering on in the first place.
(edited)
0
0