5 Messages
Connect Gemini to AV reciever
I was on hold with Tech Support, then had to pay $8.99 to talk to advanced support only to get cut off and they had no clue. Have an NAD receiver. How to I connect? With the Satellite system you go from receiver to box to TV. The Gemini goes directly into HDMI1. Please help!!
litzdog911
ACE - Sage
•
46.1K Messages
7 months ago
What sort of Audio/Video inputs does your NAD Receiver have?
0
0
JTAG64
5 Messages
7 months ago
Thank you for getting back to me. The NAD has HDMI, Optical and Component RCA. Just not sure where I put the Gemini dongle. If I put it in HDMI 1 on the NAD, I can hear sound but it says device not detected on the TV
0
0
litzdog911
ACE - Sage
•
46.1K Messages
7 months ago
You'll need to connect the Gemini dongle to the TV. Then connect one of the TV's outputs to your NAD. What sort of outputs does your TV have?
0
0
JTAG64
5 Messages
7 months ago
Litzdog, sorry for the slow reply and I really appreciate your help. The TV has HDMI and RCA. I have tried a variation of connections with no success. Let me upload some pics today and maybe you could show me. Again, Much appreciated.
John
0
0
JTAG64
5 Messages
7 months ago
Litxdog, Here is the NAD T748
Her
Here is the Visio E65 E1 . I have the Genie dongle in HDMI1. It plays on the TV Audio, but, what is the connection I need for the NAD to run Audio through the stereo?
0
0
litzdog911
ACE - Sage
•
46.1K Messages
7 months ago
TV's Optical Audio OUT to NAD's Optical Audio INPUT. You'll need an optical digital audio cable.
0
0
Jrandomuser
ACE - Expert
•
1.2K Messages
7 months ago
The receiver shows ARC on the “monitor out” HDMI and the TV shows ARC on HDMI 1 (the leftmost of the 3 in the horizontal row. So if those 2 are connected (with the Gemini plugged into another of the TV’s HDMI ins) that should (perhaps with appropriate settings on both receiver and TV) have the TV feed its audio back to the receiver.
0
0